Product Name:keyless entry smart car alarm system with passcode car security
protection auto central lock feature
brand is cardot
Main Detailed Functions:
1. passive keyless entry lock or unlock car door
automatical lock when you approach to the car at 1-3meters
automatical unlock when you leave your car at 1-3meters
2. Ignition button start stop engine:
pressing the footbrake pedal and pressing start or stop button to
enable car engine or disable the car engine
3. Remote start stop engine at long distance:
in arming,press start or stop button or other functional button to
start engine or stop car engine at long distance,auto oil path wire
detection to make sure successful start!
in the summer,you can remote start to precool the car.
in the winter,you can remote start engine to prewarm the car.
4. passcodes touching key pad unlock car door and engine starting
if car owner lost smart keys or smart key battery is dead,you still
can enter the car and start engine by inputting passwords,making
your driving life confortable and convient!
default passwords is 123456
you can change this passwords by you!
if you forget passwords,you can press learning button 12
times,passwords will be returned to factory passcodes 123456
5. shock sensor alarm(shock sensor is optional and extra value!!!)
in arming,if trigger shock situation,system will make alarm such as
hitting the car
siren will sound and direction light will flash.
shock sensor sensitivity is adjusted by swich knob!
6. side door alarm
factory signal output is negative,most cars have negative side door
but if your car is positive signal,you can change signal polarity
by jumper setting inside the main unit
7. window rolling up output
factory output is negative signal,if you want to have auto window
up feature after action,you need to install window closer module.as
for some cars,can trigger window up by relay!
8. central lock automatication
when unlock car door and start engine,all car doors will be auto
locked after some times.it is useful to protect children sitting
behind of the car!
when engine is off,all car doors will be auto unlocked
9. washing car mode
service mode is also called washing car mode,under the mode,no car
alarm features,car owner only lock or unlock car door.
10. remote open trunk
holding the remote unlock button for more than 5seconds,car trunk
will be triggerred
factory signal output is negative signal
if your original car trunk control wire signal is positive signal
you need to add one relay to switch polarity.
11. mute or vocal alarm mode
under the mute mode,no siren sound,only flashing light
you can set mute mode when engine is running
12. hopping code protection
this code has high security protection anti dublicated anti
13. supporting auto transmission or manual transmission car
14. supporting diesel or petrol car
15. siren negative output,directly working with original car horn
if you want to use car alarm siren,you can change siren output
signal polarity by jumper setting inside the main unit.
16. bypass output
bypass module is not standard position,if your car has chip key
immobilizer signal,you need to install bypass module to work.it is
also called chip avoidance device.
it has three wires:
red wire to 12V
black wire to ground or by pass output wire from smart car alarm or
push start system
RFID sense wire to car key cylinder,wrap it 3-5 circles
product standard composition:
1pc main unit,2pcs smart remotes,1pc start stop button,1pc 6P start
cable,1pc main cable,1pc passwords touch key pad,2pcs pke
antennas,1pc alarm antenna,1pc english manual,1pc color packing
How to find ignition wire and 12V power wire?
OBTAINING CONSTNT 12V
We recommend two possible sources for 12v constant:the(+)terminal
the battery, or the constant supply to the ignition switch,will be
fuse within 12 inches of this connection,if the fuse also willbe
other circuits, such as door locks, a power window module,
control system etc,fuse sccordingly.
FINDING THE 12V SWITCHED IGNITION WIRE
The ignition wire is powerd when the key is the run or start
,this is because the ignition wire powrts the ignition system(spark
plugs,coil)as well as the fuel delivery system(fuel pump,fuel
computer),accessory wires lose power when the key is in the start
position to make current available to the srarter motor.
How to find(+)12v ignition with your multimter:
1.set to DCV or DC voltage (12v or 20V is fine)
2.attach the (-)porobe of the meter to chassis ground.
3.probe the wire you suspect of being the ignition wire,the
column harness or ignition switch harness is an excellent place to
find this wire.
4.turn the ignition key switch to the run position,if your meter
(+)12v,go to the next step.if it doesn't,probe another wire.
5.now turn the key to the start position,the meter display should
steady,not dropping more than a few tenths of a volt,if it dropse
to or all the way to zero,go back to step 3. if it stays steady
you have found an ignition wire.
Product Real Photos: